Local roofersFree to callNo forms to fill out
Serving Weehawken and nearby towns
Menu
Call (551) 373-3025
Metal Roofing

Metal Roof Repair Weehawken, NJ

Most metal roof leaks in Weehawken come from fasteners, laps and flashing, and all of them can be repaired without replacing the roof, and fix it with the right fasteners, sealant and trim for the panel. Dial (551) 373-3025 to talk with a local roofer about the leak.

On a metal roof, the panels rarely fail first; the fasteners do. Exposed fastener roofs, such as corrugated and ribbed panels, are held down by screws with rubber washers, and those washers dry out, crack and stop sealing after years of sun. Daily thermal movement makes the panels slide a little against the screws, loosening them over time.

The second big source of leaks is the laps and edges. Panel overlaps lose their sealant, ridge closures go missing and the trim around walls and vents loosens. Rust starts at cut edges, scratches and fastener holes and moves faster where two different metals touch.

Repairs make sense while most of the panels are solid and the rust is limited to spots. It helps to know whether the leak appears during rain or on cold, dry mornings, since metal roofs can sweat. Stay off the roof, especially when wet or frosty, since painted metal is extremely slick.

Depending on what the roofer finds, metal roof repair in Weehawken, NJ can go hand in hand with metal roof coating and metal roof inspection.

Looking for Weehawken metal roof repair? Call (551) 373-3025 to talk to a local roofer.

Call now
The process

What happens during a metal roof repair

Here is how a roofer typically approaches a metal roof repair.

  1. Inspect the roof

    The roofer checks the underside from the attic or building interior, then walks the roof along the purlins looking at screws, laps, trim and penetrations. If the cause is unclear, a water test narrows it down.

  2. Fix the screws

    Screws with failed washers are removed and replaced, usually with a slightly larger diameter screw so it bites fresh metal and wood. On older roofs, replacing every screw at once often makes more sense than chasing leaks one at a time.

  3. Close the overlaps

    The roofer cleans old sealant from failed overlaps and lays new sealant before refastening the lap. Generic caulk is not a substitute because it cracks as the metal moves.

  4. Treat the rust

    Rusted spots are cleaned to sound metal and coated, and panels that have rusted through are patched or replaced. If copper or treated wood touches the panel, that contact is broken.

  5. Fix the flashing

    Loose ridge cap, rake trim and wall flashing are refastened, missing foam closures are replaced and cracked pipe boots are swapped for flexible metal roof boots. A badly bent or rusted panel can be swapped without redoing the roof.

What is included

What metal roof repair covers

Pipe boot repair

Cracked vent boots are replaced with flexible boots made for metal panels so they move with the roof.

Corrosion treatment

Rust spots are cleaned, primed and painted and the cause of the rust is addressed.

Fastener replacement

Backed-out fasteners are replaced, sized up where needed and driven to the right depth.

Lap sealing

Seams that wick water are resealed with flexible sealant so water cannot travel between panels.

Trim repair

Missing foam closures at the ridge and eaves are replaced to close gaps at the roof edges.

Related service

Metal Roof Leak Repair Weehawken, NJ

Metal roof leak repair starts by sorting out where the water really comes from, since it can travel a long way along a rib or purlin. Fasteners, laps, ridge closures and penetrations account for the large majority of metal roof leaks. The lasting fix is mechanical first and sealant second.

In Weehawken, metal roof leaks are often noticed late because insulation absorbs the water first. Keep water away from electrical fixtures, and if it is near lights or outlets, turn off that circuit at the panel if you can do so safely. Then have the source tracked down before the next rain.

Related service

Corrugated Metal Roof Repair Weehawken, NJ

Corrugated metal roofing shows up on everything from farm buildings to porch roofs, and it wears in predictable ways. Because every fastener pierces the panel, worn washers and loose screws are the main repair, and old nailed roofs are often converted to screws. Replacing old nails with gasketed screws is often the single most useful repair.

A rusted corrugated panel in Weehawken can be cut out and replaced without redoing the whole roof. Matching the rib spacing and depth is what lets a new panel lap tightly with the old ones. Laps should face away from prevailing wind so rain is not pushed into them.

Local help

Metal Roof Repair Near Me

Metal roof repair calls in Weehawken come from barns and outbuildings as often as from houses. From Weehawken out to neighboring towns such as Union City, West New York, Hoboken and Secaucus, corrugated and ribbed panels on older buildings are the usual repair jobs, along with metal re-roofs on homes that are starting to show their first problems, and catching rust while it is still on the surface keeps a panel from rusting through.

Searching for metal roof repair near me from Weehawken or Union City, West New York, Hoboken and Secaucus? Call (551) 373-3025 to talk to a roofer who works in your part of town.

What the local climate does to a roof

Cold winters bring snow, ice and a long stretch of freezing nights. When warm attic air melts the snow, the meltwater runs down and freezes again at the eaves, building ice dams that push water up under the shingles. Coastal storms and heavy spring rain drive water sideways into flashing, valleys and old chimneys. Most homeowners in Weehawken, NJ have the roof checked in the fall and again after the snow melts.

Why call

Why act early

Drier ceilings

Small roof problems caught early usually stay small repairs.

Familiar with local homes

Local roofers see the same roofs and storm damage across Weehawken and nearby towns.

Know what happens next

Ask the roofer about the cause, the options and the estimate before work starts.

Metal Roof Repair FAQ

Is my metal roof leaking or is it condensation?
The timing gives it away more than anything. Water on cool, dry mornings points to condensation, and water only during rain points to a leak. The fix for sweating is ventilation or insulation under the panels.
Is oil canning a defect I need to repair?
It is the waviness you sometimes see in the flats of metal roof panels. It is caused by the way the metal was rolled, an uneven deck or restricted thermal movement, and it rarely affects performance. Ask a roofer to look if it appeared suddenly or comes with noise.
Can rust on a metal roof be repaired?
Light rust is cleaned down to sound metal, primed and topcoated. Panels with holes need a metal patch or replacement, not just paint. When rust covers much of the roof, a restoration coating is often considered.
Why is my metal roof leaking?
The screws and their rubber washers cause more metal roof leaks than anything else. Washers dry out and crack, screws back out as the panels expand and contract, and some screws were overdriven or missed the framing. Open laps, missing ridge closures, cracked pipe boots and loose wall flashing make up most of the rest.
Should I just caulk around the screws?
Sealant on top of a bad screw usually fails within a season or two. The lasting repair is to replace the screw and washer, sizing up if the hole has worn. Buried screws are harder to inspect and replace next time.

More questions? Call (551) 373-3025

Other services that may help

  • Metal Roof Coating

    Cleaning, priming and coating a worn metal roof to seal seams and fasteners and stop surface rust, without tearing off panels that are still sound.

    Learn more
  • Metal Roof Inspection

    Metal roof inspections that look at screws, laps, rust, closures and the underside of the panels, with findings ranked by urgency.

    Learn more
  • Metal Roof Replacement

    Tearing off failed metal panels, repairing the framing and putting on a new metal roof, so the new roof starts on a sound base.

    Learn more
  • Standing Seam Metal Roof

    Standing seam metal roofs with concealed clips, raised seams and no exposed screws in the panels, built to let the metal move without leaking.

    Learn more

Looking for something else?

See all roofing services

Talk to a Weehawken roofer about metal roof repair

Call (551) 373-3025 to talk to a roofer serving Weehawken, NJ.

Talk to a local roofer(551) 373-3025Call now

Free to call. No forms to fill out.

Call (551) 373-3025